used in repairing and rebuilding the brass, bronze casting and casting defects.
Product description:
It’s the high performance polymerization metal materials compounded by various alloy material and modified toughening heat resistant resin,
Product usage of BD114 copper metal epoxy repair double components coating wearing compound:
suitable for the repairing and rebirth of the brass,bronze casting and process castings defects.The color after repairing is basically the same as
the substrates,with the very high strength and excellent wear&corrosion resistance and aging resistant properties,can do various mechanical
processing together with substrates.
how to use:
Surface treatment: Do the coarsening treatment on the pending-repair surface and clean it by cleaning agent.
2.Configuration: According to the mass ratio A:B=6:1 or volume ratio A:B=4:1,make A and B two components mix uniformly,then use it up within
specified operation time limit.
3.Coating: Make the mixed-up material spread coating on the pending-repair areas layer by layer,the first layer should be compacted,make it infiltrate
fully with the substrates.If the following working procedure needs machining,should keep out appropriate machining allowance
4.Curing: Cure for 8 hours at the temperature of 25-30 degree before doing machining, cure for 24 hours before putting it into use,if the temperature is low,
should heat it up or prolong the curing time to promote the curing.
Application case photos of BD114 metal copper anti wear abrasion resistant repair compound epoxy coating:
